TC Electronic Broadcast 6000 - Manual (Page 118)

MDX 5.1
114 System 6000 MKII Algorithms
Normal
Range: Off / On
When this parameter is set to “On” the Input
channels selected to be controlled by the re-
spective sidechain will also input to the side-
chain.
SC1 Add1, SC 2 Add2, SC 3 Add3
Range: Off, LFr Max, RFr Max, Cnt Max, LSr
Max, RSr Max, Extern Max, LFr Sum, RFr Sum,
Cnt Sum, LSr Sum, RSr Sum, Extern Sum.
These parameters enable extra channels to be
assigned to the respective Sidechain Input. The
extra Sidechain Input channels will not be pro-
cessed by the sidechain.
The Sum settings will add the Input to the side-
chain, whereas the Max settings only will con-
tribute to the sidechain if the level exceeds the
other Input channel levels.
MDX 5.1 algorithm –
DXP SC1 page
MDX 5.1 algorithm – DXP SC1 page
Sidechain Fader Groups 1/2/3
The DXP pages reveal separate controls for
Sidechain 1 to 3 plus LFE. This allows for differ-
ent settings for the Center or Surround channels,
where speech intelligibility or low level ambience
tend to get lost, like when a feature film is re-
purposed for broadcast or DVD under domestic
listening conditions.
If it is required to process more audio channels
than 5.1, Engines can be run in parallel to cater
for 6.1, 7.1, 10.2, 12.2 or even higher number for-
mats. Parallel Engines attain perfect phase con-
servation and resolution, and do not compro-
mise audio in any way.
MDX 5.1 algorithm – DXP all page
MDX 5.1 algorithm – DXP all page
The “All” page gives and excellent overview of
the three SideChain parameters.
The All parameter grabs the Sidechain Mid value
and changes the Lo and Hi settings relative to
this value. The Sidechain All Threshold, Gain and
Steer all parameter is also per default assigned
to Fader 4 on the Sidechain pages.
Bypass DXP
Bypass function for the entire DXP processing
section
MDX 5.1 algorithm –
limit soft clip page
MDX 5.1 algorithm – limit soft clip page