TC Electronic Broadcast 6000 - Manual (Page 42)

VSS™ 4
38 System 6000 MKII Algorithms
Example: When a Decay multiplier is set to 1.25
and the Master Decay is 2.0 seconds the result-
ing decay time will be 2.5 seconds.
LoMid Decay
Decay multiplier in relation to the Master Decay,
for the frequencies above the Lo Xover and be-
low the Mid Xover settings. Example: When a
Decay multiplier is set to 1.25 and the Master
Decay is 2.0 seconds the resulting decay time
will be 2.5 seconds.
HiMid Decay
Decay multiplier in relation to the Master Decay,
for the frequencies above the Mid Xover and be-
low the Hi Xover settings.
Example: When a Decay multiplier is set to 1.25
and the Master Decay is 2.0 seconds the result-
ing decay time will be 2.5 seconds.
Hi Decay
Decay multiplier in relation to the Master Decay,
for the frequencies above the Hi Xover setting.
Example: When a Decay multiplier is set to 1.25
and the Master Decay is 2.0 seconds the result-
ing decay time will be 2.5 seconds.
Lo Xover
Sets the Cross-over frequency between the Lo
and LoMid Decay.
Mid Xover
Sets the crossover frequency between the Lo-
Mid and HiMid Decay.
Hi Xover
Sets the Cross-over frequency between the Hi-
Mid and Hi Decay.
VSS™ 4 algorithm – gloss page
VSS™ 4 algorithm – gloss page
Reverb Modulation
The algorithm designers have adjusted the dif-
fuse field part of the reverb to be as smooth
and natural sounding as possible. However to
integrate with the source material or to get a dif-
ferent sound, it’s sometimes needed to add in
modulation to the late part of the reverb.
Modulation Type
Select between different types of modulation on
the five Reverb diffuse fields.
Modulation Rate
Range: ±50
Adjusts the Rate of the selected modulation.
Modulation Depth
Range: 0 to 200 %
Adjusts the Depth of the selected modulation.