EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 87)

IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
Issue 6.0.B
77
Audio Monitoring Selection
The radio buttons between each pair of stereo audio channel buttons or next to a 5.1
audio channel button allow the selection of one audio track for monitoring:
•
In stereo mode: the first radio button for channels 1 and 2, the second radio button
for channels 3 and 4, the third radio button for channels 5 and 6, and so on until
channels 15 and 16.
•
In 5.1 and Stereo mode: in the example combining two 5.1 tracks and 2 stereo
tracks, the first radio button selects channels 1 to 6, the second radio button selects
channels 7 to 12, the third radio button selects channels 13 and 14 and the fourth
radio button selects channels 15 and 16.
Audio meters located on the right side of the Video Display represent the monitored track.
Refer to section 7.4 ‘Audio Meters / Trim Area’ on page 87.
Note:
When you right-click on a 5.1 radio button, a popup menu appears in which you
can select the 5.1 components that should be monitored on the left and right
channels. You can choose between the following options: Mixed, L+R, Ls+Rs
or Center (output on L+R speakers).
Examples
If a clip has to be created without audio for the channels 1 and 2, disable the 2 buttons
corresponding to those channels:
Clicking on the left audio button will remove the left audio component from the source so
that the clip made has no left audio channel. In this case, the right channel will be output
on the left and right.
Clicking in addition on the right audio button will remove the right audio component so
that the clip made has no right audio channel.