EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 191)

IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
Issue 6.0.B
181
The Advanced button from the Wave Output area gives access to more controls:
Note
The Digigram board controls the configuration for the audio inputs and outputs
of the workstation. It is therefore recommended to configure the Digigram board
as shown on the screenshots you will find in Appendix 3: Digigram Hardware
Settings.
11.1.3 Voiceover Process
Process Overview
The voiceover recording process includes four steps:
1. Defining the Area to Record the Voiceover (see page 182)
2. Recording the Voiceover (see page 182)
3. Checking the Recorded Voiceover (see page 183)
4. Attenuating other Tracks when Using Voiceover (see page 184)