EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 146)

Issue 6.0.B IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
136
Example
In the example below, you work in Overwrite mode and want to extend the OUT point of
the clip called ‘Clip3’.
8.9.4 Extending a Clip with a Still Frame
The Extend Still function repeats only the first/last frame of a clip up to the modified IN or
OUT point.
To extend a clip with a still frame, proceed as follows:
1. If required, change the Overwrite or Insert mode clicking the button.
2. Select the video element to be extended with a still frame.
3. Do one of the following:
a. To extend the IN point, place a mark IN before the IN point of the selected
element.
b. To extend the OUT point, place a mark OUT after the OUT point of the selected
element.
4. Click the Extend Still button .
The clip is extended and the extended area is filled in with the first frame of the clip (when
the IN point has been extended) or with the last frame of the clip (when the OUT point
has been extended).
Note
Increasing the length of a video element by dragging the element edge and
pressing SHIFT simultaneously will extend the element with a still frame.