EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 182)

Issue 6.0.B IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
172
10.3.2 Possible Audio Channel Functions
The functions available via the Audio Channels command are divided into four groups of
sub-commands. A black bullet is displayed in front of the commands applied to the
selected elements:
Group of Sub-Commands Description
These commands allow specifying the source track you
want to be applied to the selected element.
These commands allow the user to specify whether the
track should be output as a mono or as a stereo track.
These commands allow the user:
•
to route the left or right audio channel to both stereo
channels
•
to mix both stereo channels into one audio mono
channel
These commands allow the user:
•
to mute the left or right audio channel
•
to swap the left and right audio channels
•
to swap the left and right channels and mute one of
them.
Note
Selecting Stereo from the Audio Channels command will reset the audio
channel effects.