EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 85)

IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
Issue 6.0.B
75
7.2.8 Selecting the Tracks to be Added to the
Timeline
Possible Audio Configurations
The IPD Xedio plugin can manage the reading, the editing and the export of files with up
to 16 audio channels, grouped in stereo pairs and/or 5.1 groups.
The possible audio configurations are:
•
up to 8 stereo pairs
•
up to 5 stereo pairs and one 5.1 group
•
up to 2 stereo pairs and two 5.1 groups.
Within the general settings of Xedio Manager, you need to check the Enable 5.1
management parameter to allow the management of 5.1 tracks in the Xedio Suite.
When importing files with 2, 4, 8 or 16 audio channels, the assignment must follow the
default parameters set in the database. In case the default assignments cannot be
applied, all audio tracks will be considered as stereo pairs.
Note:
The output of 16 audio channels is managed through a multi-channel audio
board. To make sure that Xedio can use this audio board, you need to
manually change the audio board assignment in the Control Panel of
Windows (Sounds and Audio devices properties > Playback and Recording
options).
Track Selection for Clips and Monitoring
Overview
All the available audio sources from a media are displayed below the Player.
A stereo track is represented by .
A 5.1 track is represented by
In stereo mode, up to 8 tracks can appear.
Examples:
(8 stereo)
(4 stereo)