EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 147)

IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
Issue 6.0.B
137
This is done in the same way as the normal Extend operation explained in ‘How
to Extend or Shorten a Clip Using a Drag Operation’, on page 135.
8.9.5 Extending or Shortening a Clip by
Modifying its Speed
The Extend Speed function keeps the original length of the clip but modifies the play
speed to fit in the modified IN or OUT point. In this case a rendering is needed.
To extend or shorten a clip by modifying its speed, proceed as follows:
1. If required, change the Overwrite or Insert mode clicking the button.
2. Select the video element to be extended or shortened by modifying the play speed.
3. Do one of the following:
a. To extend the IN point, place a mark IN before the IN point to be extended.
b. To extend the OUT point, place a mark OUT after the OUT point to be extended.
c. To shorten the IN point, place a mark IN after the IN point to be shortened.
d. To shorten the OUT point, place a mark OUT before the OUT point to be
shortened
4. Click the Extend Speed button .
The clip is extended or shortened without adding or removing video material but its play
speed is adapted to fit between the modified IN or OUT point.
Note
Increasing or reducing the length of a video element by dragging the element
edge and pressing ALT simultaneously will create a fast or slow motion clip.
This is done in the same way as the normal Extend operation explained in ‘How
to Extend or Shorten a Clip Using a Drag Operation’, on page 135.