EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 81)

IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
Issue 6.0.B
71
Field/Button Keyboard
Shortcut
Function Name and Description
Clip Name
Field where the clip name can be entered.
Mark IN TC
Timecode of the Mark IN defined on the loaded
media.
Mark OUT TC
Timecode of the Mark OUT defined on the loaded
media.
Nowline TC
Timecode of the nowline defined on the loaded
media.
To move the mark IN, mark OUT or nowline to a given TC, type the timecode in the
corresponding field and press ENTER.
You can edit hours, minutes, seconds or frames separately in the timecode fields:
•
Double-click on the hours, minutes, seconds or frames area, and the corresponding
area will be activated for editing.
•
Simple-click in the timecode field, the cursor should blink on the right and you can
type the full timecode value
How to Make a Clip
Using the transport controls listed above, you can create a clip as follows:
1. Select the requested media from the nearline or from a bin and double-click on it or
drag it to the Player area. It will open in the Player.
2. Play the media using the transport control commands described on page 65.
3. Position the nowline at the requested position for the Mark IN point and click the
Mark IN button .
4. Position the nowline at the requested position for the Mark OUT point and click the
Mark OUT button .
5. Enter a name in the Clip Name field.
6. To save the clip, drag it to a bin in the Tree view.
The Save Clip window opens.
Note
If you press CTRL when dragging the clip to the bin, the Save Clip window
does not open. The clip name will be the one entered in the Clip Name field or
it will be the creation date if the field has been left empty.
7. Enter data for the clip in the Save Clip window.