EVS IPDirector IPD XEDIO PLUGIN Version 6.0 - January 2013 User Manual - Manual (Page 143)

IPD Xedio Plugin Version 6.0 – User Manual
EVS Broadcast Equipment – January 2013
Issue 6.0.B
133
8.9 Extending or Shortening Clips
8.9.1 Introduction
It is possible to extend or to shorten the duration of a clip previously added to the edit, by
modifying the IN or OUT point. The material from the original media will be used to
extend the clip, if available. The Overwrite or Insert modes are taken into account in
extend actions.
This can be done in different ways:
•
using one of the Extend editing buttons on the timeline: , ,
•
dragging the media on the timeline itself.
8.9.2 Extend Modes
Different extend modes are available to achieve slightly different results:
Function Function Name and Description
Extend The Extend button allows extending or shortening a clip on the
selected track(s), modifying its IN or OUT point to a position
defined by a mark IN or mark OUT on the timeline.
See also the section 8.9.3 ‘Extending or Shortening a Clip’, on
page 134.
Extend Still The Extend Still button allows:
•
extending the IN point of a selected video element as a still
frame (0% motion) up to a mark IN defined before the IN point.
•
extending the OUT point of a selected video element as a still
frame up to a mark OUT defined after the OUT point.
See also the section 8.9.4 ‘Extending a Clip with a Still Frame’, on
page 136.
Extend Speed The Extend Speed button allows:
•
extending the IN point of a clip up to a mark IN defined, without
modifying its content.
•
extending the OUT point of a clip up to a mark OUT defined,
without modifying its content.
The effect achieved is a slow motion or fast motion clip.
See also the section 8.9.5 ‘Extending or Shortening a Clip by
Modifying its Speed’, on page 137.