Assigning keywords in numeric mode, Searching the database using the remote panel, 5 searching the database using the remote panel – EVS MulticamLSM Version 11.00 Operating Manual User Manual

Page 94: 3 assigning keywords in numeric mode

Issue

11.00.C

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

10.4.3

Assigning Keywords in Numeric Mode

To assign keywords to a clip in numeric mode, recall the clip, then press

MENU to access

the secondary clip menu on the Remote Panel.

Enter the keyword position in the list using the

F_ keys. Every time a new digit is entered,

the corresponding keyword is displayed in the highlighted area in the centre of the LCD

screen, to allow the operator to validate the entry before confirming it. If a wrong digit is

entered, press the

CLEAR key to delete it. Once the right keyword is found, press

ENTER to confirm or MENU to cancel.
The rules for keyword assignment and deleting keywords are identical between LIST and

NUMERIC modes.

10.5

Searching the Database Using the Remote

Panel

Keywords and ranking assigned to clips can be used to search the clips database.
When the current element on the primary channel is a record train, the Search function is

directly available from the C position in the secondary menu. To call it, press

MENU to

enter the secondary train menu, then press once the

C key.

When the current element on the primary channel is a clip, the Search function is still

available from the same location, but is “hidden” behind the Name function. To call it in

this case, press

MENU to enter the secondary clip menu, then press twice the C key.

In both cases, the LCD display becomes (in LIST mode):

keyword89012

2 keyword89012

keyword89012

F1:action_1 F6:action_6

F2:action_2 F7:action_7

F3:action_3 F8:action_8

F4:action_4 F9:Prev.page

p.01

F5:action_5 F0:Next page

Reset