EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 35)

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
25
6. PGM-PRV Mode
6.1 1PGM+PRV (Press A from MAIN MENU)
At least 2 playback channels must be available to run this configuration.
This mode allows the operator to make replays with/or without transition effects between
all outputs. A string of replays can be put together and played back at the operator’s
discretion.
The LCD display is divided in two menus controlled by soft keys (A,B,C,D). To gain
access to the upper menu, press MENU from the Remote Panel.
6.1.1 Secondary Menu
Aud. Met. PgmSpd Sort->TC PostRoll
Mix. Sw to IN Search Pref
Mix / Wipe L>R / Wipe R>L / Wipe U>D / Wipe D>U / Cut
These options determine the transition effect that will occur between the PGM and PRV
pictures. The mix, wipe and cut are on the same location. Pressing this button will browse
through these effects, showing the active one on the LCD menu. Please refer to Setup
menu to select the duration of the transition effect.
PGM1 CAM A *PRV1* CAM B
Aud.Met. PgmSpd Sort->TC PostRoll
Mix. Sw to IN Search Pref
P.1 B.1 Clips: LOCAL Records: LOCAL
PL 11: <
Msg:
Rst Cam Local Sync Prv 2nd CTRL
Cam A Cam B Cam C Cam D