EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 174)

Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
164
16. Offside Line Mode
16.1 Introduction
16.1.1 Definition and License Code
Note
The internal Offside Line mode is a software option, which requires the license
code 114 being installed. For more information on the required license key,
contact the Support or Sales teams.
The internal Offside Line mode is not available on EVS servers working with 10-
bit codecs.
The internal Offside Line mode makes it possible to make the offside line visible on the
screen by shading a portion of the pitch. You can use this feature on clips or trains loaded
on the PGM1. This effect can then be recorded in the loop of the server and reinserted in
the feed of a recorder channel.
The external Offside Line mode offers a more advanced offside line feature, as well as
other live tools, when the EVS server is used in combination with the Epsio application.
For more information, refer to the Epsio user manual.
16.1.2 Activating the Offside Line Mode
To activate the Offside Line mode, you need to set as follows the parameters in the
Operational Setup menu on the Remote Panel:
The
Offside Line parameter (p.12.3 F1) has to be set to ‘Yes’.
The External Offside parameter (p.12.3 F2) has to be set to ‘No’.
When you activate the offside line, you can no longer use a second controller.
16.1.3 Accessing the Offside Line Mode
When the offside line mode is active, the Offside Line option is available from the
operational menu in the PGM/PRV or Multi PGM mode:
Rst Cam
Local Sync Prv OFFSIDE
Cam A Cam B
You access this mode by pressing the SHIFT+D key.