EVS MulticamLSM Version 11.00 Operating Manual User Manual

Page 22

Issue

11.00.C

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Function Key

Use

F8: Stop Record

Stops the record. The

REC key will go off and the F8 function key is

now used to restart the record.

F9: Fill Playlist

«Dump» feature which allows all clips to be «dumped» at the end of

the current playlist. This allows the operator to save all material to

tape, as a backup feature after a show is complete. You can select in

the

Setup menu which camera angles have to be included in the Fill

Playlist function.
If your clips are currently connected to another server on the

network, the clips from that server will be added to your current

playlist.
Make sure that the playlist you have selected is an empty one. This

function will append the clips at the end of an existing playlist.

F0: Technical

Setup

Gives access to the technical setup menu.

Important
In order to guarantee the validity of data and clips previously saved, it is advised

to properly exit the application by pressing

ALT+Q and ENTER from the

keyboard, or

F6 and then ENTER from the Remote Panel. DO NOT TURN OFF

THE SYSTEM WHILE THE APPLICATION IS RUNNING.