The clip information area, 4 the clip information area – EVS MulticamLSM Version 11.00 Operating Manual User Manual
Page 65

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
55
9.3.4
The Clip Information Area
The next area is the Clip Information Area which displays the clips of the selected page
and bank(s). Two clips’ banks are displayed at a time.
For each clip and camera angle, the following information is available:
Field
Description
Clip ID
Unique identifier of the clip on the server. Ex: 111A
The clip ID is followed by the “Creating” message when the
clip is in the process of being created, copied or moved to this
location.
For more information on growing clips, refer to the section
9.2.5 ‘Recall and Playback of Growing Clips’, on page 40
Clip “rank”
Clip rank depending on the channel on which it has been
created :
•
Primary (“
*” next to the clip ID)
•
Secondary (“
=” next to the clip ID)
The clip rank information is highlighted in blue if the clip is
protected.
Clip name
Name of the clip, either automatically assigned or defined by
the user.
Archive Status
•
if the clip ID is blinking green, the clip is flagged for
archiving, but not yet archived
•
if the clip ID is permanently highlighted in green, the
archiving of the clip has been completed
Note
In the standard view (cameras A to D), if camera E and/or F exist for a particular
clip, the D-column for this clip is replaced by the mention “
More Clips” on blue
background.