EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 112)

Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
102
11.10.4 How to Insert Clips into a Playlist
The following rules apply to the procedure below:
• You need to be in PGM/PRV mode to be able to use the TAKE key on the Remote
Panel to insert a clip.
• Depending on what is selected for the Insert in playlist parameter in the
Operational Setup menu (p.3.1 F6), the clip will be inserted before or after this
selected position.
To insert a clip into a playlist, proceed as follows:
1. Using the Playlist Edit mode or the Browse mode, scroll to the location where the clip
must be inserted.
2. Call the selected clip. It appears on the PRV output.
3. Do one of the following to insert the selected clip in the playlist, at the position shown
on the PGM output:
• Press the A key (INSERT function) on the Remote Panel
• Press the TAKE key on the Remote Panel
• Press the SHIFT+INSERT keys on the Remote Panel
A confirmation message will appear if that option has been enabled in the Setup menu.
After the clip has been inserted, you can press PLST to return to the playlist at the current
position.
11.10.5 How to Insert the Result of a Clip Search into a
Playlist
In Playlist Edit mode with a PRV channel, when PRV CTL is enabled, the operator has
full control of the PRV channel while the playlist remains loaded on the PGM channel.
On the PRV channel, he can perform all clip-related functions, including database search
using timecode, keywords and ranking, from the VGA Search Screen as well as from the
secondary clip menu of the Remote Panel.
Once the desired clip(s) is(are) found, it(they) can easily be inserted in the playlist that is
still loaded on the PGM output. By switching PRV CTRL ON or OFF, the operator can
very easily combine playlist editing and database search functions.