EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 158)

Issue
11.00.C
Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
148
Local mode
The local system is identified with the Local sign after the name of the system. The Local
function ( A) gives direct access to the Local mode and is highlighted when Local mode is
activated.
Clips Mode
The Clip function (B) allows the operator to connect to the clip banks of another LSM
connected to the network. In other words, the VGA clip screen and the F_ keys of the
Remote show the clips from the selected LSM. If the operator presses the RECORD key,
he goes in Live mode on the local record trains.
Records Mode
When the operator selects one of the LSM in the network menu, he connects the record
trains to this LSM. This means that the next time he presses the Records function (C) the
active channels will go in Live mode (or Near Live mode for remote trains 1 ) on the record
trains of the selected LSM. The clips remain connected to the LSM they were connected
to.
Clips+Records Mode
The Clip+Rec function (D) allows the operator to connect both to the clips banks and to
the record trains of a remote server. The VGA clip screen and the F_ keys of the Remote
Panel show the clips from the selected server. The next time the operator presses the
RECORD key, the active channels will go in Live mode (or Near Live mode for remote
trains) on the record trains of the selected LSM.
Select the function key corresponding to the remote system, then the LCD display returns
to the normal mode:
PGM1 112B/04 *PRV1* CAM B
AUX Clip
MIX Sw to IN PGMSpd PREF
P.1 B.1 Clips: ALBERT Records: MICHEL
PL 11: <
Msg:
LOCAL SYNC PRV
CAM A CAM B CAM C CAM D