Remote panel operations, Operations, Record – EVS MulticamLSM Version 11.00 Operating Manual User Manual

Page 23: Mark, Last cue, Play, Emote, Anel, Perations, 1 operations

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Issue

11.00.C

Remote Panel Operations

4.1

Operations

4.1.1

RECORD

This key lights red when the system is recording. Pressing this key brings the system in

E/E (“live”) mode, and starts the record if necessary (depending on the settings of the

Setup menu). The E/E mode is actually playing pictures already recorded by the system,

and has a delay of 3 frames compared to the live source, on all audio and video tracks.

4.1.2

MARK

This function marks up to 256 cues that can be marked while recording or playing. The

cues are marked on the LIVE or PLAYBACK program depending on the value set in the

Setup menu. When the operator has marked 256 cues, the next one will overwrite the

oldest one.

4.1.3

LAST CUE

This function re-cues the EVS server to previous cue point relative to the current

timecode position. Each time the Last Cue button is pressed, the EVS server re-cues to

the previous cue, etc. When recalling a cue point, the cue number appears in the upper

left corner of the OSD if this option is enabled with the

Cue number on OSD parameter

in the

Operational Setup menu (p.1.1 F1)

4.1.4

PLAY

This function initiates a forward motion. It can also be used to start playback of playlists

and clips (refer to PLST command).
When

PgmSpd/Var Max is OFF, the default playback speed when pressing the PLAY

key is 100% for standard pictures, 33% for Super Motion pictures with a Triple Speed

camera (SD), and 50% for Super Motion pictures with a Double Speed camera (HD),.
When

PgmSpd/Var Max is ON, the value defined in the Operational Setup menu for the

PGM Speed/Var max parameter (p.9.1 F3) is used.