EVS MulticamLSM Version 11.00 Operating Manual - Manual (Page 149)

Multicam - Version 11.00 – Operating Manual
EVS Broadcast Equipment SA – April 2012
Issue
11.00.C
139
12.2 Creating Timelines
In Multicam, the timelines have to be created from an existing playlist or copied from an
existing timeline. After the transformation, the duration of the timeline cannot be changed.
Note
It is not allowed to insert growing clips in a timeline.
12.2.1 How to Create a Timeline from a playlist from the
Remote Panel
To transform a playlist to a timeline with the Remote Panel, proceed as follows:
1. Select the playlist you want to convert.
2. Press an empty playlist position.
3. Select the
CopyToTL option (B) on the Remote to copy the playlist to a timeline on
the selected empty position.
4. Press ENTER on the Remote to confirm the CopyToTL
The playlist is converted into a timeline at the playlist position you selected.
12.2.2 How to Create a Timeline from a playlist from the
VGA
To transform a playlist to a timeline in the VGA, proceed as follows:
1. Select the playlist you want to convert.
2. Press CTRL+C on the keyboard to copy it.
3. Paste it into an empty playlist position using the CTRL+T keys (rather than CTRL+V)
The timeline appears on the Remote as “TL” for timeline, rather than “PL” for playlists. On
the Clip screen, they appear with a blue background (similar to the protected clip
identifier).
All audio tracks in the playlist are placed on the timeline as follows:
• Each timeline has two audio edit tracks containing each single audio.
• Independently from the audio configuration, the first audio input is edited on the first
audio track, the second input on the second audio track.
• The Mono per group parameter in the Operational Setup menu (p.4.1 F1) can be
used to set how many audio mono tracks can be used for each edit track.