Paint mode, Introduction, Aint – EVS MulticamLSM Version 11.00 Operating Manual User Manual

Page 163: 1 introduction

Multicam - Version 11.00 – Operating Manual

EVS Broadcast Equipment SA – April 2012

Issue

11.00.C

153

14.

Paint Mode

14.1

Introduction

Note
The Paint mode is a software option, which requires the license code 114 being

installed. For more information on the required license key, contact the Support

or Sales teams.
The Paint mode is not available on EVS servers working with 10-bit codecs.

The functionality of this software package can be operated using the tablet and the stylus,

or a touch screen. The normal pointing device is the tablet. It is selected in the

Setup

menu.
Change the

Pointing device parameter in the Operational Setup menu (p.9.2 F2) to

toggle between the tablet and the touch screen (only when the touch screen is available).

The touch screen must always be connected to the RS422 port #6 and defined with the

RS422 #6 parameter in the Operational Setup menu (p.T2.2 F6).
The use of the Loop function allows the operator to record the effect back into the 1

record channel of the server, and to create a clip with the paint feature. Rolling a clip

while in the Loop mode, in Painting, and dissolving paint image on/off allow for a very

powerful feature.