Marker beacon annunciations, Traffic annunciation, Traffic annunciation – Garmin G1000 Piper PA32 User Manual
Page 76

Garmin G1000 Pilot’s Guide for Piper PA32
190-00692-00 Rev. B
2-26
FLIGHT INSTRUMENTS
cautions. The flashing CAUTION annunciator continues to flash until acknowledged by the pilot (by pressing
the CAUTION Softkey).
An advisory provides general information to the pilot that may not need immediate attention. A flashing
ADVISORY Softkey annunciation (no aural tone) is used to alert the pilot of any message advisories. The
flashing ADVISORY annunciator continues to flash until acknowledged by the pilot (by pressing the ADVISORY
Softkey).
Figure 2-37 Softkey Annunciation (ALERTS Softkey labels)
MARKER BEACON ANNUNCIATIONS
Marker Beacon Annunciations are displayed on the PFD to the left of the Selected Altitude. Outer marker
reception is indicated in blue, middle in yellow, and inner in white. Refer to the Audio Panel and CNS section
for more information on Marker Beacon Annunciations.
Figure 2-38 Marker Beacon Annunciations
Inner Marker
Middle Marker
Outer Marker
Altimeter
TRAFFIC ANNUNCIATION
The G1000 System displays traffic symbolically on the Inset Map (PFD), the Navigation Map Page (MFD), and
other MFD page maps. Refer to the Hazard Avoidance section and Appendix F for more details about the Traffic
Information Service (TIS). When a Traffic Advisory (TA) is detected, the following automatically occurs:
• The PFD Inset Map is enabled, displaying traffic
• A flashing black-on-yellow ‘TRAFFIC’ annunciation (Figure 2-39) appears to the top left of the Attitude
Indicator for 5 seconds and remains displayed until no TAs are detected in the area
• A single “TRAFFIC” aural alert is generated, unless an optional Traffic Advisory System (TAS) is installed
(refer to the applicable TAS documentation for alerts generated by TAS equipment)
If additional TAs appear, new aural and visual alerts are generated.