Garmin G1000 Piper PA32 - Manual (Page 236)

GPS NAVIGATION
190-00692-00 Rev. B 5-102 Garmin G1000 Pilot’s Guide for Piper PA32
Figure 5-95 Ready to Load V4
k) Press the ENT Key.
l) V4 is now loaded into the flight plan as shown in Figure 5-96.
Figure 5-96 V4 is Loaded in the Flight Plan
5) V4 will now be made the active leg of the flight plan.
a) Press the FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight SLN. The TO waypoint of the leg is selected in order to activate the leg.
c) Press the ACT LEG Softkey. The confirmation window is now displayed as in Figure 5-97. Note the TOP to SLN
leg is actually part of V4.