Garmin G1000 Piper PA32 - Manual (Page 175)

GPS NAVIGATION
190-00692-00 Rev. B 5-41 Garmin G1000 Pilot’s Guide for Piper PA32
7) Turn the small FMS Knob to enter the desired VNV altitude.
Figure 5-40 Selecting Altitude Mode
Altitude Label
8) Press the ENT Key. The option to select MSL or AGL is now displayed.
9) Turn the small FMS Knob to select ‘MSL’ or ‘AGL’.
10) Press the ENT Key. The cursor is placed in the ‘VNV’ offset distance field.
Figure 5-41 Entering Offset Value
Offset Value
11) Turn the small FMS Knob to enter the desired target altitude offset from the selected Direct-to.
12) Press the ENT Key to highlight ‘Activate?’ or turn the large FMS Knob to highlight the ‘COURSE’ field.
13) Turn the small FMS Knob to enter the desired course to the waypoint.
14) Press the ENT Key to highlight ‘ACTIVATE?’.
15) Press the ENT again to activate the Direct-to.
Selecting a direct-to by city or facility name:
1) Press the Direct-to Key.
2) Highlight the city field (to the right of the identifier) or facility field (directly below the identifier) field.
3) Enter the city (to the right of the identifier field) or the facility (directly below the identifier field).
4) Once the desired city or facility name is displayed, press the ENT Key to confirm the selection.
5) Press the ENT Key to activate the direct-to.