System overview, Pfd in reversionary mode – Garmin G1000 Piper PA32 User Manual
Page 31

190-00692-00 Rev. B
Garmin G1000 Pilot’s Guide for Piper PA32
1-21
SYSTEM OVERVIEW
Press the
BACK Softkey to return
to the top-level softkeys.
Press the
IDENT or BACK Softkey to return
to the top-level softkeys.
ALERTS
ALERTS
DME
ALERTS
Figure 1-17 Transponder Softkeys
PFD IN REVERSIONARY MODE
In the event of a display failure, the G1000 System automatically switches to reversionary mode. The
following information indicates G1000 data that displays differently in reversionary mode. All other critical
flight data displays in the same format as in normal operating mode and is discussed in other sections of the
System Overview.
ENGINE
Displays the LEAN and SYSTEM Softkeys
LEAN
Displays the CYL SLCT Softkey to facilitate engine leaning
CYL SLCT
The Cylinder Select Softkey cycles through selection of each
cylinder indicated by changing the cylinder display to light
blue
SYSTEM
Displays the DEC FUEL, INC FUEL, and RES FUEL
Softkeys
DEC FUEL
Decreases gallons remaining by one gallon for each press
INC FUEL
Increases gallons remaining by one gallon for each press
RST FUEL
Resets fuel used to zero and gallons remaining to full