Garmin G1000 Piper PA32 - Manual (Page 279)

GPS NAVIGATION
190-00692-00 Rev. B 5-145 Garmin G1000 Pilot’s Guide for Piper PA32
10) Wi th ‘LOAD?’ highlighted, press the ENT Key to load the approach OR: to activate the approach, highlight ‘ACTIVATE?’.
NOTE: If the approach is not approved for GPS, a ‘NOT APPROVED FOR GPS’ message is displayed with ‘YES’
highlighted. Press the ENT Key to acknowledge the message. To cancel the approach, select ‘NO’ and press the
ENT Key.
ACTIVATE APPROACH
‘ACTIVATE APPROACH’ activates the approach.
Figure 5-152 Activate Approach Selection
Activating the approach for a direct-to or flight plan destination airport:
1) From the active flight plan window, press the PROC Key to display the Procedures Window.
2) Highlight ‘ACTIVATE APPROACH’.
3) Press the ENT Key.