Garmin G1000 Piper PA32 - Manual (Page 277)

GPS NAVIGATION
190-00692-00 Rev. B 5-143 Garmin G1000 Pilot’s Guide for Piper PA32
Selecting a departure for the departure airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT DEPARTURE’.
3)
Pr ess the ENT Key.
4) Enter an identifier, city, or facility name.
5) Pr ess the ENT Key until the departure field is highlighted .
6) Select the desired departure.
7)
Pr ess the ENT Key. A window appears listing the available transitions for the departure.
8) Select the desired transition or vectors.
9)
Pr ess the ENT Key. A window appears listing the available runways for the departure.
10) Select the desired runway.
11) Wi th ‘LOAD?’ highlighted, press the ENT Key to load the departure.
SELECT ARRIVAL
‘SELECT ARRIVAL’ selects a published standard terminal arrival route (STAR) for the destination airport or
replaces a current arrival with a new selection.
Figure 5-150 Selecting an Arrival
Available
Arrivals
Available
Transitions