Garmin G1000 Piper PA32 - Manual (Page 278)

GPS NAVIGATION
190-00692-00 Rev. B 5-144 Garmin G1000 Pilot’s Guide for Piper PA32
Selecting an arrival for a direct-to or flight plan destination airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT ARRIVAL’.
3)
Se lect the ENT Key.
4) Enter an identifier, city, or facility name.
5) Pr ess the ENT Key until the arrival field is highlighted .
6) Select the desired arrival.
7)
Pr ess the ENT Key. A window appears listing the available transitions for the arrival.
8) Select the desired transition or vectors.
9)
Pr ess the ENT Key. A window appears listing the available runways for the arrival.
10) Select the desired runway.
11) Wi th ‘LOAD?’ highlighted, press the ENT Key to load the arrival.
SELECT APPROACH
‘SELECT APPROACH’ selects a published instrument approach for the destination airport or replaces the
current approach with a new selection.
Figure 5-151 Selecting an Approach
Available
Approaches
Available
Transitions
Selecting an approach for a direct-to or flight plan destination airport:
1) Display the Procedures Window by pressing the PROC Key.
2) Highlight ‘SELECT APPROACH’.
3)
Pr ess the ENT Key.
4) Enter an identifier, city, or facility name.
5) Pr ess the ENT Key until the approach field is highlighted .
6) Select the desired approach.
7)
Pr ess the ENT Key. A window appears listing the available transitions for the approach.
8) Select the desired transition or vectors.
9)
Pr ess the ENT Key.