Accusys ExaRAID GUI - Manual (Page 360)

Appendix
D-71
Event ID 0x243d
Type SYSTEM Severity WARNING Parameters
Message The PLD version of the returning controller is not the same.
Description The PLD version of the returning controller is not the same.
Advice Contact local sales or support office.
Event ID 0x243f
Type SYSTEM Severity NOTICE Parameters
Message Connected expansion or disk numbers of the returning controller.
Description
During fail-back, detected expansion or disk numbers of the
returning controller is not the same.
Advice
Make sure the links between controllers and expansions are
installed properly. If the controller still can’t startup successfully,
please contact local sales or support office.
Event ID 0x2440
Type SYSTEM Severity NOTICE Parameters
Message
After re-detecting, connected expansion numbers of the two
controller are the same now.
Description
After re-detecting, connected expansion numbers of the two
controller are the same now.
Advice None
Event ID 0x2823
Type ENCLOSURE Severity INFO Parameters
Controller
ID, Control-
ler ID
Message BBM optional of returning controller x updated by controller y
Description
During fail-back, if the BBM option of returning controller x is not
the same as controller y. The BBM option of returning controller x
will be updated by controller y automatically.
Advice None
Event ID 0x2824
Type ENCLOSURE Severity WARNING Parameters
Message The BBM installation of the returning controller is nor the same
Description The BBM installation of the returning controller is nor the same
Advice
Check both controller if the BBM is properly installed or replace
with a new BBM.