Accusys ExaRAID GUI - Manual (Page 312)

Appendix
D-23
• Disk group parity regeneration
Event ID 0x206d
Type TASK Severity NOTICE Parameters
Scrub. Prog-
ress,
DG ID,
LD_ID, Notify
threshold
Message Scrub progress(w%) on DGxLDy reach to the notify percent(z%)
Description
The progress of scrubbing on dgxldy has reached the pre-define
threshold.
Advice None
Event ID 0x2024
Type TASK Severity INFO Parameters DG ID
Message Reg. parity on DGx started
Description Reg. parity on dgx was started manually.
Advice None
Event ID 0x2026
Type TASK Severity WARNING Parameters DG ID
Message Reg. parity on DGx aborted
Description Reg. parity on dgx was aborted.
Advice Check if the disk group is busy or non-optimal.
Event ID 0x2027
Type TASK Severity INFO Parameters DG ID
Message Reg. parity on DGx stopped
Description Reg. parity on dgx was stopped manually.
Advice None
Event ID 0x2025
Type TASK Severity NOTICE Parameters DG ID
Message Reg. parity on DGx completed
Description Reg. parity on dgx was completed.
Advice None