Accusys ExaRAID GUI - Manual (Page 295)

Appendix
D-6
• Roaming
• Recovery
Event ID 0x2063
Type RAID Severity NOTICE Parameters
Rebuild
progress,
DG ID,
Notify
threshold
Message Rebuild progress(y%) on DGx reach to the notify percent(z%)
Description The progress of rebuilding has reached the pre-define threshold.
Advice None
Event ID 0x0820
Type RAID Severity INFO Parameters
Message Disks changed during power-off
Description
The number of disks installed is different when the controller was
powered off. Either existing disks were removed or new disks were
installed during power-off.
Advice
Check hard disk status, and conduct roaming or recovery, if nec-
essary.
Event ID 0x1004
Type RAID Severity INFO Parameters DG ID
Message DGx is imported
Description Foreign disk group has been imported to be dgx.
Advice None
Event ID 0x1c02
Type RAID Severity INFO Parameters VOL ID
Message VOLx is imported
Description Foreign volume has been imported to be volx.
Advice None
Event ID 0x2052
Type RAID Severity INFO Parameters DG ID
Message DGx is recovered
Description Disk group dgx has been recovered.
Advice None