Accusys ExaRAID GUI - Manual (Page 344)

Appendix
D-55
• Power supply
Event ID 0x2821
Type ENCLOSURE Severity NOTICE Parameters
Voltage,
Enclosure ID
Message Voltage source x in enclosure y back to normal
Description Voltage source x in enclosure y returned to normal range.
Advice
If the voltage is very unstable, contact local sales or support
office.
Event ID 0x2822
Type ENCLOSURE Severity WARNING Parameters
Voltage ID,
Enclosure ID,
Voltage
Message Abnormal voltage source x in enclosure y (z V)
Description Voltage source x in enclosure y was out of normal range.
Advice
Check the power supply system, or contact local sales or support
office.
Event ID 0x280d
Type ENCLOSURE Severity INFO Parameters
PSU ID,
Enclosure ID
Message Power supply x in enclosure y detected
Description Power supply unit (PSU) x was installed and present.
Advice None
Event ID 0x280e
Type ENCLOSURE Severity ERROR Parameters
PSU ID,
Enclosure ID
Message Power supply x in enclosure y failed
Description
The controller cannot get status from power supply unit (PSU) x in
enclosure y, which might have failed or removal.
Advice
Replace the power supply, or contact local sales or support
office.