Accusys ExaRAID GUI - Manual (Page 359)

Appendix
D-70
Event ID 0x2438
Type SYSTEM Severity INFO Parameters
Message Enclosure serial number in controller x updated by controller y
Description
During fail-back, if enclosure serial number of returning controller
x is not the same as controller y. The enclosure serial number of
controller x will be updated by controller y automatically
Advice None
Event ID 0x2439
Type SYSTEM Severity ERROR Parameters
Message RCC link or protocol not correct
Description
The internal link or transfer protocol of the returning controller
doesn’t work well
Advice Contact local sales or support office
Event ID 0x243a
Type SYSTEM Severity WARNING Parameters
Message The model name of the returning controller is not the same
Description The model name of the returning controller is not the same
Advice
Make sure the model name of the returning controller is the
same. If not the same, replace the returning controller board.
Event ID 0x243b
Type SYSTEM Severity WARNING Parameters
Message
The Daughter board model of the returning controller is not the
same
Description
The Daughter board model of the returning controller is not the
same
Advice
Make sure the daughter board moduel of the returning controller
is the same. If not the same, replace the daughter boadr module
of the returning controller to make the models are the same.
Event ID 0x243c
Type CONTROLLER Severity WARNING Parameters
Message The Memory size of the returning controller is not the same
Description The Memory size of the returning controller is not the same
Advice
Make sure the memory size of the returning controller is the same.
If not the same, replace the memory module of the returning
controller to make the memory size are the same.