Accusys ExaRAID GUI - Manual (Page 137)

Using the CLI Commands
4-6
4.2.6 RAID algorithms options
Command lddelete
Synopsis lddelete dgxldy [-f]
Description Delete a logical disk.
Parameters [-f]: force to delete LUN mapping
Command ldname
Synopsis ldname dgxldy name
Description Name a logical disk.
Command ldlist
Synopsis ldlist dgxldy/dgx/all
Description
List the status of one logical disk, all logical disks on a disk
group, or al logical disks on the controller.
Command intellicompute
Synopsis intelicompute dgxldy/all on/off
Description
Enable or disable Intelligent data computation for one or all
RAID 3/5/6 logical disks.
Command readmaxtime
Synopsis readmaxtime dgxldy/all xxmsec
Description
Specify the maximum response time for one or all RAID 3/5/6
logical disks.
Command checkonread
Synopsis checkonread dgxldy/all on/off
Description
Enable or disable check-on-read for all RAID 3/5/6 logical
disks.
Command writelog
Synopsis writelog [on/off]
Description Review or set the write logging.
Parameters [on/off]: enable or disable write logging