Accusys ExaRAID GUI - Manual (Page 113)

Using the RAID GUI
2-73
Read the NVRAM configuration on hard disks and save to NVRAM
Specify this option to read the NVRAM configuration data on the
specified hard disk and save to NVRAM.
Get main configurations
Specify this option to save the NVRAM configuration data to a file. The
following three options are available:
.bin (for user to backup configuration): The configuration data is saved as
config.bin.
.html (human-readable): The configuration data is saved as config.html.
.html (to send human-readable mail): The configuration data is saved as
config.html, which is then sent to a specified mail receiver. When this
option is selected, enter a mail address for the receiver.
Note
This option will be available when on-line hard disks exist. Therefore,
only on-line hard disks will be displayed in the list box.
Figure 2-27 Options in the Configurations screen-2
(System Management menu)
Figure 2-28 Options in the Configurations screen-3
(System Management menu)