Accusys ExaRAID GUI - Manual (Page 356)

Appendix
D-67
• Email (SMTP) server status
• System start-up and shutdown
Event ID 0x2450
Type SYSTEM Severity WARNING Parameters
Message Firmware version are not the same
Description
Firmware version are not the same, only one controller will be
startup
Advice
Check firmware version of both controller, and update the
wanted firmware to another controller
Event ID 0x240b
Type SYSTEM Severity WARNING Parameters
Message Controller x failed to send mail
Description
The controller failed to send mail. Both primary and secondary
mail servers cannot be reached by the controller.
Advice
Check if the network connection is up, and check if the network
and SMTP settings are correct.
Event ID 0x240a
Type SYSTEM Severity INFO Parameters
Message Controller x sned mail back to normal
Description The controller can reach the mail server and start to send mail.
Advice None
Event ID 0x2402
Type SYSTEM Severity INFO Parameters
Message System to be restarted or halted
Description The RAID system is going to get restarted or halted.
Advice None
Event ID 0x2403
Type SYSTEM Severity INFO Parameters
Message RAID system started
Description The RAID system was started.
Advice None