Accusys ExaRAID GUI - Manual (Page 355)

Appendix
D-66
• Firmware update
Event ID 0x2407
Type SYSTEM Severity INFO Parameters Controller ID
Message System firmware in controller x updated
Description System firmware in controller x was updated successfully.
Advice Restart the controller so that the new firmware can be effective.
Event ID 0x2408
Type SYSTEM Severity INFO Parameters Controller ID
Message Controller x failed to update system firmware
Description The controller x cannot update the system firmware.
Advice Check the firmware file is not corrupt and has the correct version.
Event ID 0x2429
Type SYSTEM Severity INFO Parameters Controller ID
Message Boot code in controller x updated
Description Boot code in controller x was updated successfully.
Advice Restart the controller so that the new code can be effective.
Event ID 0x242a
Type SYSTEM Severity INFO Parameters Controller ID
Message Controller x failed to update boot code
Description The controller x cannot update the boot code.
Advice Check the firmware file is not corrupt and has the correct version.
Event ID 0x244f
Type SYSTEM Severity WARNING Parameters
Message Bootcode version are not the same
Description
Bootcode version are not the same, only one controller will be
startup
Advice
Check bootcode version of both controller, and update the
wanted bootcode to another controller