Accusys ExaRAID GUI - Manual (Page 287)

Appendix
C-3
C.2 (L) Load Image by TFTP
Before a Boot ROM or System ROM update, you need to set up the TFTP
server for loading a new firmware image. Follow the steps below to load an
image:
1. Open the TFTP Server, click the Browse button to set the boot code or
firmware image directory. You can use the Show Dir button to see the
files in the directory.
2. Press [L] in the Boot Utility and enter the file name of boot code of
firmware.
3. The TFTP server starts loading. When the loading is complete, you can
proceed to update the Boot ROM or System ROM.