Accusys ExaRAID GUI - Manual (Page 343)

Appendix
D-54
Event ID 0x2809
Type ENCLOSURE Severity NOTICE Parameters Voltage
Message
+12V voltage source in backplane back to normal (z V)
+12V voltage source in controller back to normal (z V)
Description
+12V voltage source in backplane or controller returned to nor-
mal range, right now is zV.
Advice
If the voltage is very unstable, contact local sales or support
office.
Event ID 0x280a
Type ENCLOSURE Severity WARNING Parameters Voltage
Message
Abnormal +3.3V voltage source in backplane (z V)
Abnormal +3.3V voltage source in controller (z V)
Description
The current voltage of the +3.3V voltage source in backplane or
controller was out of normal range, right now is zV.
Advice
Check the power supply system, or contact local sales or support
office.
Event ID 0x280b
Type ENCLOSURE Severity WARNING Parameters Voltage
Message
Abnormal +5V voltage source in backplane (z V)
Abnormal +5V voltage source in controller (z V)
Description
The current voltage of the +5V voltage source in backplane or
controller was out of normal range, right now is zV.
Advice
Check the power supply system, or contact local sales or support
office.
Event ID 0x280c
Type ENCLOSURE Severity WARNING Parameters Voltage
Message
Abnormal +12V voltage source in backplane (z V)
Abnormal +12V voltage source in controller (z V)
Description
The current voltage of the +12V voltage source in backplane or
controller was out of normal range, right now is zV.
Advice
Check the power supply system, or contact local sales or support
office.