Accusys ExaRAID GUI - Manual (Page 155)

Using the CLI Commands
4-24
4.5.6 Local terminal ports
4.5.7 Enclosure
Command ethlist
Synopsis ethlist
Description
Displays the control setting of all management network
interface ports, including the following information:
• TELNET service status: on/off
• SSH service status: on/off
• Web service status: on/off
• Out-band API status: on/off
• Out-band API with SSL status: on/off
• Broadcast status: on/off
Command termconf
Synopsis termconf [baud_rate stop_bit data_bit parity flow_ctrl]
Description Review or set the terminal.
Parameters
baud_rate: 2400, 4800, 9600, 19200, 38400, 57600, or 115200)
stop_bit: 1 or 2
data_bit: 7 or 8
parity: parity check (none, even, or odd)
flow_ctrl: flow control (none or hw)
Command encpoll
Synopsis encpoll xxsec
Description
Sets the polling interval, at which the controller polls the
enclosure controller in the external enclosure to acquire the
status of the enclosure.Valid values include 0 sec (disable),
1sec, 2sec, 5sec, 10sec, 30sec, and 60sec. By default, it is 30,
which means controller doesn’t acquire the status of the
enclosures
Command enclist
Synopsis enclist encx element/all
Description
List the current status of one or all management elements of
an enclosure.
Parameters
element could be one of the following values: spow/vlt/crt/
fan/tm. Each of which means power supply, voltage sensor,
current sensor, fan, and temperature sensor.