Accusys ExaRAID GUI - Manual (Page 158)

Using the CLI Commands
4-27
Command isnsconfig
Synopsis isnsconfig add/remove server[:port]
Description
Configure the iSNS servers for iSCSI target automated
discovery by iSCSI initiators. At most two iSNS servers can be
added. The first added one will be the primary server and
the latter one is the secondary server. If iSNS server is
configured, the controller shall automatically register iSCSI
target information.
Command isnslist
Synopsis isnslist
Description isnslist displays information of iSNS servers.
Command sesslist
Synopsis sesslist istx/all
Description
Display sessions to one or all iSCSI targets including the
following information.
Command iscsiport
Synopsis
iscsiport ispx method [-a ip_addr][-s net_mask][-ggw_addr]
[-m MTU_size]
Description Set the IP address of an iSCSI port, ispx.
Command iscsiportlist
Synopsis iscsiportlist ispx
Description Display the IP address settings and MAC of an iSCSI port.
Command iscsi targport
Synopsis iscsi targport [listening_port]
Description Set iSCSI target listening port.
Command iscsiaggregport
Synopsis
iscsiaggregport create method [-a ip_addr] [-s net_mask] [-g
gw_addr][-m MTU_size][-p all/x,y,...] iscsiaggregport delete
iscsiaggregport update method [-a ip_addr] [-s net_mask] [-
g gw_addr] [-m MTU_size]
Description
Create, deletes or updates an iSCSI aggregation target port
with IP address and other network related setting.