Accusys ExaRAID GUI - Manual (Page 101)

Using the RAID GUI
2-61
2.8.2.2 iSCSI ports
This shows information about iSCSI ports, including Assignment (DHCP/
Static), IP address, Subnet Mask, Gateway, Jumbo, MAC address,
Aggregation and Link Status.
In addition, following buttons are provided to configure iSCSI ports.
To change the settings, follow the instructions given below:
2.8.2.2.1 Modify
Select an iSCSI port and click Modify to open the configurations window,
specify the following options:
After setting done, click Apply to make it available
.
2.8.2.2.2 Entity-iSCSI Entity Name
The iSCSI entity name is using to consist iSCSI Qualified Name (IQN), a
special name for addressing iSCSI initator and target in a public network.
Each iSCSI target node has an unique IQN. For example, an
IQN is consisting of an iSCSI Entity Name and a number of iSCSI target
Note
• The default iSCSI listening port is 3260.
• ispa1~4 belong to Controller A; ispb1~4 belong to Controller B
(only appear in redundant controller model).
Entity Configure iSCSI Entity for IQN header usage.
Sess.List Monitoring current session of iSCSI
Target Configure iSCSI Target node
CHAP User Manage CHAP User account
iSNS Manage iSNS server
Aggregate RM-
Aggr Configure, remove an Aggregation grouping port
Modify Modify the information of specific iSCSI port
Assignment Method DHCP / Static (Default)
IP Address Specifies a IP address
Network Mask Specifies a network mask address
Gateway Specifies a gateway address
Jumbo Frame Enable or Disable (Default)