Accusys ExaRAID GUI - Manual (Page 350)

Appendix
D-61
Event ID 0x2401
Type SYSTEM Severity INFO Parameters
Message RAID configurations on all disks erased
Description
RAID configurations stored on all disks were erased. All RAID con-
figurations are lost.
Advice
Restart the controller so that all disks can be re-initialized all
together.
Event ID 0x2415
Type SYSTEM Severity INFO Parameters
Message NVRAM configurations restore to default
Description
The controller configurations stored on NVRAM were erased and
restored to factory default.
Advice None
Event ID 0x2416
Type SYSTEM Severity INFO Parameters DISK ID
Message NVRAM configurations restored from HDDx
Description The NVRAM configurations were restored from hddx.
Advice None
Event ID 0x2417
Type SYSTEM Severity INFO Parameters
Message NVRAM configurations restored from file
Description
The configurations were restored from a file uploaded to the
controller.
Advice None
Event ID 0x2409
Type SYSTEM Severity FATAL Parameters
Message NVRAM configuration checksum error
Description
The checksum stored on NVRAM do not match the contents on
NVRAM. This could happen if the controller was not properly shut-
down. Because NVRAM configurations might be corrupt and
cannot be trusted, all event logs are automatically erased.
Advice
Restore the configurations from hard disks or by uploading the
backed-up configuration file. If this event happens continuously,
contact local sales or support office.