Accusys ExaRAID GUI - Manual (Page 339)

Appendix
D-50
Event ID 0x2422
Type CONTROLLER Severity ERROR Parameters Controller ID
Message Secondary system flash in controller x is corrupt
Description
The secondary system flash chip on controller x is corrupt and
cannot be used. But the primary flash still works.
Advice
Check if there are any hardware hazards that lead to abnormal
flash corruption. Watch the secondary flash chip.
Event ID 0x242b
Type CONTROLLER Severity ERROR Parameters Controller ID
Message Bootrom in controller x is corrupt
Description
Bootrom on controller x is corrupt and cannot be used. Because
the bootcode is stored on the bootrom, the controller cannot
work.
Advice
Check if the power supply is stable. Replace with a new control-
ler. Contact local sales or support office.
Event ID 0x2423
Type CONTROLLER Severity INFO Parameters
Bad block
number,
Controller ID
Message Bad block x on primary system flash added in controller y
Description
Bad blocks happened and remapped successfully on the pri-
mary system flash in controller y.
Advice
Check if there are any hardware hazards that lead to abnormal
flash corruption. Watch the secondary flash chip.
Event ID 0x2424
Type CONTROLLER Severity INFO Parameters
Bad block
number,
Controller ID
Message Bad block x on secondary system flash added in controller y
Description
Bad blocks happened and remapped successfully on the sec-
ondary system flash in controller y.
Advice
Check if there are any hardware hazards that lead to bad
blocks. Watch the secondary flash chip.