Accusys ExaRAID GUI - Manual (Page 31)

Introduction
1-6
• Management Interfaces
• Local management via RS-232 port and LCD panel
• Remote management via Ethernet and TCP/IP
• Support network address settings by static, DHCP, and APIPA
• Support web-based GUI via embedded web server (HTTP)
• Support multiple languages and on-line help on web GUI
• Web-based multiple RAID system viewer with auto system discovery
• Embedded Command Line Interface (CLI) via RS232 port, SSH, and
telnet
• Host-side Command Line Interface (CLI) via FC/SAS/SCSI and TCP/IP
• Support in-band and out-of-band RAID management
• Support SSL for protecting management sessions over Internet
• Support RAIDGuard™ Central for remote centralized management
• System Monitoring Functions
• Support monitoring and control of hardware components and chassis
units
• Support SMART UPS monitoring and alert over RS232 port
• NVRAM-based event logging with severity level
• Event notification via beeper, email (SMTP), and SNMP trap (v1 and
V2c)
• Selective event logging and notification by severity level
• Support redundant multiple email server and SNMP agents
• Support multiple event recipients of email and SNMP trap
• Support SNMP GET commands for monitoring via SNMP manager
• Redundant Controller Functions (model-dependent)
• Support dual active-active controller configuration
• Online seamless controller failover and failback
• Cache data mirroring with on/off control option
• Auto background task transfer during controller failover and failback
• Support simultaneous access to single disk drive by two controllers
• Online manual transfer preferred controller of a virtual disk
• Uninterrupted system firmware upgrade