Accusys ExaRAID GUI - Manual (Page 240)

Advanced Functions
5-67
5.7.3 Uninstalling the VDS Provider
Follow the steps below to uninstall the VDS Provider GUI from the
management host.
1. Click Start > Settings > Control Panel > Add or Remove Programs.
2. Locate VDS Provider and click on it to start the un-installation. Click No
to quit or Yes to confirm the un-installation.
5.7.4 Using the VDS Provider Configuration Utility
Before using VDS-based management for RAID systems, you are required
to use the VDS Provider Configuration Utility to register the RAID systems
such that the VDS Provider knows how to link to the RAID systems by
network. You are also required to supply the password of the RAID
systems for the VDS Provider to get proper management access rights to
the RAID systems.
To launch the VDS Provider Configuration Utility, click Start > Programs >
VDS Provider > Configure Tool (assuming the VDS Provider is installed in its
default path). The table below describes the functions of the
configuration utility.
Menu Bar
System Exit: Exit the program.
Help
Help Contents: Open the help web page.
About: Display the program version.
Scan Bar
Scan RAID
systems in the
LAN Press the bar to scan the online RAID systems on
the LAN and they will be displayed on the System
Panel.
System Panel
Display the information of RAID system.