Accusys ExaRAID GUI - Manual (Page 329)

Appendix
D-40
Event ID 0x3009
Type HOST Severity WARNING Parameters
Chip ID,
Controller ID
Message Reset host i/f chip x in controller y
Description
The controller resets chip x that failed to execute commands
properly. This could be to recover from a transient error due to
unstable channel or heavy traffic. The controller will resume nor-
mal operations of the chip after reset; however, this could result
in performance drop of the LUNs exported to the host ports of this
chip.
Advice
If this event occurs often, check the host connectivity, or contact
local sales or support office.
Event ID 0x300a
Type HOST Severity FATAL Parameters
Chip ID,
Controller ID
Message Host i/f chip x in controller y failed
Description
The controller cannot execute commands properly on chip x
after all appropriate recovery procedures were conducted. This
could be resulted from unstable power supply to the system. All
LUNs controlled by the chip will be unavailable to hosts.
Advice
Check power supply, replace with a new controller, or contact
local sales or support office.
Event ID 0x300b
Type HOST Severity ERROR Parameters
Host Chan-
nel ID, Con-
troller ID,
Error Code
Message Host channel x in controller y PCI Error: z
Description The controller has detected error in the host channel.
Advice
Check if the power supply is stable. Contact local sales or sup-
port office.