Accusys ExaRAID GUI - Manual (Page 320)

Appendix
D-31
• Bad block handling
Event ID 0x080d
Type DISK Severity WARNING Parameters Disk ID
Message DST on HDDx completed with electrical error
Description DST on hddx completed with electrical error.
Advice The disk failed or will fail soon, replace the hard disk.
Event ID 0x080e
Type DISK Severity WARNING Parameters Disk ID
Message DST on HDDx completed with unknown test element error
Description
DST on hddx completed with error but the failed elements are
unknown.
Advice The disk failed or will fail soon, replace the hard disk.
Event ID 0x1401
Type DISK Severity WARNING Parameters
Start Sector
NO, End
Sector NO,
Disk ID
Message Bad blocks between sector x and sector y on HDDz detected
Description
A bad block starting from sector x on hddy was detected by the
controller.
Advice
If the number of bad blocks detected is growing exceptionally
fast or beyond a reasonable number, consider to conduct diag-
nostics and replace with new disks. If there is no subsequent
event notifying the recovery or reallocation of the bad block
detected, data on the bad block is lost.
Event ID 0x1404
Type DISK Severity WARNING Parameters
Start Sector
NO, End
Sector NO,
Disk ID
Message Bad blocks between sector x and sector y on HDDz recovered
Description
A bad block starting from sector x on hddy was recovered by
the controller.
Advice
If the number of bad blocks detected grows exceptionally fast or
beyond a reasonable number, consider to conduct diagnostics
and replace with new disks.