Siemens SITRANS P - Manual (Page 53)

SITRANS P measuring instruments for pressure
Transmitters for gage pressure for the paper industry
DS III series with PMC connection
2/53 Siemens FI 01 · 2009
2
Rated operating conditions
Degree of protection (to EN 60529) IP65, IP68, NEMA X, enclosure cleaning, resistant to lyes, steam to 150° C (302 °F)
Process temperature -20 ... +100 °C (-4 ... +212 °F)
Ambient conditions
• Ambient temperature -20 ... +85 °C (-4 ... +185 °F)
• Storage temperature -50 ... +85 °C (-58 ... +185 °F)
• Climatic class
- Condensation Permissible
• Electromagnetic compatibility
- Emitted interference and interference im-
munity
To EN 61326 and NAMUR NE 21
Design
Weight (without options) ≈ 1.5 kg (≈ 3.3 lb)
Housing material Poor in copper die-cast aluminium, GD-AlSi12 or stainless steel precision casting, mat. No. 1.4408
Wetted parts materials Stainless steel
• Gasket (standard) PTFE flat gasket
• O-ring (minibolt) FPM (Viton) or optionally: FFPM or NBR
Measuring cell filling Silicone oil or inert filling liquid
Process connection (standard) Front-flush, 1½", PMC Standard design
Process connection (minibolt) Front-flush, 1", minibolt design
Power supply U
H
Supplied through bus
Terminal voltage on transmitter 10.5 ... 45 V DC
10.5 ... 30 V DC in intrinsically-safe mode -
Separate 24 V power supply necessary - No
Bus voltage
• Not Ex - 9 ... 32 V
• With intrinsically-safe operation - 9 ... 24 V
Current consumption
• Basic current (max.) - 12.5 mA
• Startup current ≤ basic current - Yes
• Max. current in event of fault - 15.5 mA
Fault disconnection electronics (FDE) avail-
able - Yes
Certificate and approvals
Classification according to pressure equip-
ment directive (DRGL 97/23/EC) For gases of fluid group 1 and liquids of fluid group 1; complies with requirements of Article 3, para-
graph 3 (sound engineering practice)
SITRANS P, DS III series for gage pressure with PMC connection for the paper industry
HART PROFIBUS PA or FOUNDATION Fieldbus
© Siemens AG 2008