Siemens SITRANS P - Manual (Page 197)

SITRANS P measuring instruments for pressure
Fitttings - Shut-off valves for gage and absolute pressure transmitters
Accessories for
shut-off valves / double shut-off valves
2/197 Siemens FI 01 · 2009
2
■
Overview
The mounting set is suitable for the double shut-off valves
7MF9011-4.A and for wall, rack and pipe mounting.
■
Dimensional drawings
Mounting bracket (7MF9011-8AB) for shut-off valves 7MF9011-4DA and
7MF9011-4EA for wall, rack or pipe mounting, dimensions in mm
Mounting bracket (7MF9011-8AC) for shut-off valves 7MF9011-4FA and
7MF9011-4GA for wall, rack or pipe mounting, dimensions in mm
■
Overview
The instrument brackets are needed to mount the following units:
• Pressure gages with threaded connection at the bottom
• Shut-off valves to DIN 16270, DIN 16271 and DIN 16272
(7MF9401-7.. and 7MF9401-8..)
■
Dimensional drawings
Instrument bracket form H, for wall mounting, M56340-A0046/-A0047,
dimensions in mm
Instrument bracket form A, wall or pipe mounting,
M56340-A0053/-A0079, dimensions in mm
Selection and Ordering data Order No.
Mounting set for shut-off valves
• 7MF9011-4DA und -4EA
made of stainless steel, scope of delivery:
1x mounting bracket,
2x hexagon screws M6x40,
1x mounting clip,
2x washers 8.4 to DIN 125;
2x hexagon nuts 8.4 to DIN EN 24032
7MF9011-8AB
• 7MF9011-4FA und -4GA
made of stainless steel, scope of delivery:
1x mounting bracket,
2x hexagon screws M6x10,
1x mounting clip,
2x washers 8.4 to DIN 125;
2x hexagon nuts 8.4 to DIN EN 24032
7MF9011-8AC
6:
š
5
hex. 10
65
4
R30
6.5
Ø60.3
85
100
25
11
50
72
90 72
90
SW10
Selection and Ordering data Order No.
Instrument bracket, form H, DIN 16281
made of aluminium alloy, painted black,
for wall mounting, screw-type bracket cover
• Projection length 60 mm
M56340-A0046
• Projection length 100 mm M56340-A0047
Instrument bracket, form A, DIN 16281
made of annealed cast iron, galvanized and
primed for mounting on a wall or rack or or
on a sectional rail (horizontal/vertical);
Screw-type bracket cover M56340-A0053
Instrument bracket, form A, DIN 16281
made of annealed cast iron, galvanized and
primed with pipe clamp for mouting on a
pipe (horizotal/vertical)
Screw-type bracket cover M56340-A0079
18
10
100
28
o26 h11
65
56
o7
(60)
(160)
72
72
85
o11
10
100
91
34
M8
28
o26 h11
o63 <_
© Siemens AG 2008