Siemens SITRANS P - Manual (Page 207)

SITRANS P measuring instruments for pressure
Fitttings - Shut-off valves for differential pressure transmitters
3-way and 5-way valve manifolds DN 5
2/207 Siemens FI 01 · 2009
2
F) Subject to export regulations AL: 9I999, ECCN: N.
■
Accessories
Accessory set for 3-way and 5-way valve manifold DN 5 for
flanging
• B31: 4 screws 7 /
16
-20 UNF x 2 1 /
8
inch to ASME B18.2.1,
2 flat gaskets
• B34: 4 screws 7 /
16
-20 UNF x 2 1 /
8
inch to ASME B18.2.1,
2 O-rings (FPM 90)
• B11: 4 screws M10x55 to DIN EN 24014, 4 washers,
2 flat gaskets
• B15 (suitable for oxygen): 4 screws M10x55 to DIN EN 24014,
4 washers, 2 flat gaskets
• B16: 4 screws M10x55 to DIN EN 24014, 4 washers,
2 O-rings (FPM 90)
Washers Ø 10.5 to DIN 125
Flat gaskets made of PTFE, max. 420 bar, 80 °C
O-ring to DIN 3771, 20 x 2.65 – S – FPM90, max. 420 bar, 120 °C
Note: M10 screws only permissible up to PN 160!
Mounting plate
Made of electrogalvanized sheet-steel
• M11: For wall mounting or for securing on rack (72 mm grid)
Scope of delivery:
- 1 mounting plate 7MF9006-6EA with bolts for mounting on
valve manifold
• M12: For pipe mounting
Scope of delivery:
- 1 mounting plate M11
- 2 pipe brackets with nuts and washers for pipes with max.
Ø 60.3 mm
Valve manifold 100 bar, suitable for oxygen
S12: Only in combination with versions for aggressive liquids
and gases
Selection and Ordering data Order code Order No.
Further designs 1)
1) When ordering accessory set or mounting together with the valve
manifolds, please use Order code; otherwise use Order No.
Please add "-Z" to Order No. and
specify Order code.
Accessory set to EN
(required for flanging, weight 0.2 kg)
4x screws 7 /
16
-20 UNF x
2 1 /
8
inch to ASME B18.2; chromized
steel
2x flat gaskets made of PTFE,
max. permissible 420 bar, 80 °C
B31 F) 7MF9010-5CC
4x screws 7 /
16
-20 UNF x
2 1 /
8
inch to ASME B18.2; chromized
steel
2x O-rings to DIN 3771,
20 x 2.65 - S - FPM90, max. permiss-
ble 420 bar, 120 °C
B34 7MF9410-5CA
Accessory set to DIN 2)
2) Flange connections to DIN 19213 only permissible up to PN 160!
(required for flanging, weight 0.2 kg)
4x screws M10x55 to DIN EN 24014;
chromized steel
4x washers Ø 10.5 mm to DIN 125;
2x flat gaskets made of PTFE,
max. permissible 420 bar, 80 °C
• Standard design B11 7MF9010-6AD
• Version for oxygen B15 7MF9010-6AE
4x screws M10x55 to DIN EN 24014;
chromized steel
4x washers Ø 10.5 mm to DIN 125;
2x O-rings to DIN 3771,
20 x 2.65 - S - FPM90, max. permiss-
ble 420 bar, 120 °C B16 7MF9010-6CC
Mounting plate
for valve manifold, made of
electrogalvanized sheet-steel
for wall mounting or for securing on
rack (72 mm grid), weight 0.5 kg
Scope of delivery:
1 mounting plate with bolts for
mounting on valve manifold
M11 7MF9006-6EA
for pipe mounting, weight 0.7 kg
Scope of delivery:
1x mounting plate M11, 2x pipe
brackets with nuts and washers
(for pipe with max. Ø 60.3 mm) M12 7MF9006-6GA
Valve manifold 100 bar
suitable for oxygen
for 7MF9410-1F S13
for 7MF9410-3F S14
© Siemens AG 2008